Sale!

Audio-Technica AT-VM95E, kartridžas Audio-Technica

Original price was: € 59,00.Current price is: € 29,50.

SKU: mode_4820992196686 Category: Patefonų priedai Tags: Audio-Technica, Gamintojai_Audio-Technica, Patefonų priedai, Užsakoma prekė

Description
shopping

VM95 serijos eliptinis stereo kartridžas (su dvigubu magnetu).

Dažnių juosta: 20 – 20.000 Hz.
Kantileveris: Aliuminis.
Kanalų atskirtis: 20 dB (1 kHz).
VM tipo kartridžas.

APRAŠYMAS

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever
4.0mV output voltage
Compatible body with all VM95 Series stylus assemblies
Replacement for AT95E and AT95EX
20 to 22,000Hz frequency response

VM95 Series – Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

Model	AT-VM95E
Type	VM Stereo Dual Magnet
Mounting	1/2” centres
Frequency Response	20 – 22,000 Hz
Channel Separation	20 dB (1 kHz)
Output Channel Balance	2.0 dB (1 kHz)
Output Voltage	4.0 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle	23°
Vertical Tracking Force Range	1.8 – 2.2g (standard 2.0 g)
Stylus Shape	Elliptical
Stylus Size	0.3 x 0.7 mil
Stylus Construction	Bonded Round Shank
Cantilever	Aluminium Pipe
Coil Impedance	3.3 kΩ (1 kHz)
Coil Inductance	550 mH (1 kHz)
DC Resistance	485 Ω
Static Compliance	17 x 10 – 6 cm / dyne
Dynamic Compliance	7 x 10 – 6 cm / dyne (100 Hz)
Wire Used for Coil	T.P. Copper
Recommended Load Impedance	47,000 Ω
Recommended Load Capacitance	100-200 pF
Cartridge Weight	6.1g
Dimensions	17.2 x 18.9 x 28.3 ( H x W x D mm)
Replacement Stylus	AT-VMN95E
Accessories Included	Two 11 mm installation screws; Two 8 mm installation screws; Two washers